anti corrosion resistant coati > anti heat impact corrosion resistant repair epoxy coating

anti heat impact corrosion resistant repair epoxy coating

BD406 anti heat impact corrosion resistant ceramic rubber liner repair epoxy coating

Product description:
It’s the high performance wear&corrosion resistant polymerization ceramic materials compounded by various
high performance wear resistant,corrosion resistant material(such as:ceramic,silicon carbide,carborundum,
titanium alloy) and modified toughening heat resistant resin.Repair various pumps,valves, pipeline,heat ex-changer
end plate,blade of suffering from normal temperature corrosion,also can do large areas pre-protecting.

Performance index of BD406 of BD406 impact corrosion resistant rubber ceramic lining
repair epoxy coatings:

product name	physical state	standard packaging	volume (cm3)	operational time limit (25℃)	usable time (25℃)
406 anti corrosion resistant repair epoxy coating	semi-fluid	500g/group Two-component	364	45min	24h

color	density (g/cm3)	compressive strength (Mpa) GB1041-2008	shear strength (Mpa) GB7124-2008	bending strength (Mpa) GB1042-1999	hardness （Shore D） ASTM-D-2556	working temperature （℃）
gray	1.38	100	25	56	86	-60～150

hydrochloric acid	phosphoric acid	sodium hypochlorite	whitewash	sodium hydride
30%	30%	15%	50%	50%
Briquette heat curing at temperature of 80 degree,place it into the above medium for 30 days at room temperature,the weight change is not more than 1%

How to use of BD406 anti heat corrosion resistant ceramic rubber lining protective coating:
1.Surface treatment: Do the rust-cleaning and coarsening treatment on the pending-repair area,
then clean it by cleaning agent

2.Preparation: According to the mass ratio A:B=5:1 or volume ratio A:B=4:1,make A and B two components
mix uniformly,then use it up within specified operation time limit.

3.Coating: Make the mixed-up material spread coating on the pending-repair areas layer by layer,
the first layer should be compacted,make it infiltrate fully with the substrates.

4.Curing: Cure for 24 hours at the temperature of 25～30℃ before putting it into use,
if the temperature is low,should heat it up or prolong the curing time to promote the curing.

Packaging specification:
Two-component,500g/group,packed in a plastic drum.

Transportation storage:
Sealed storage in the cool and dry place.The warranty period is 12 months.Avoid placing it upside down,
knocking against and transporting it as a non-dangerous product during transportation.

Product packaging photo of BD406 high temperature anti corrosion resistant ceramic lining epoxy compound
repair agent:

------分隔线----------------------------